Můj košík je prázdný



DIPOL Weekly Review – TV and SAT TV, CCTV, WLAN
No. 21/2021 (May 24, 2021)
IBM has created 2 nm chips. IBM claims to have made a significant breakthrough in computer processor manufacturing. All of this is thanks to a new 2-nanometer technology that allows 50 billion transistors to be packed in a chip the size of a fingernail. The new chip has been developed in IBM's test laboratory. It is worth to mention that the process of manufacturing computer chips is measured in nanometers (nm), where a smaller number usually means a technology step forward in the creation of new chips.
New chips made in 2 nm technology process
According to IBM, the test chip can improve the performance by 45% over 7 nm products currently on the market. Importantly, the chip is more energy efficient, as it uses 75% less power (while maintaining the performance of 7 nm chips).
The leading processor players, Intel and AMD, have announced that their 2-nanometer processors will not see the light of day for several years. This further highlights how unique the IBM's achievement is in this regard.
The "extend mode" function in a PoE switch. The "extend mode" feature, usually activated via a switch on the housing, allows for powering PoE devices connected to a maximum of 250 meters of twisted-pair cable. When activated, the switch on the PoE ports disables auto-negotiation of connection speed and firmly sets the speed to 10 Mbps (the uplink ports continue to operate at 10/100 Mbps).
An example of a PoE switch with the "extend mode" function is ULTIPOWER 0064afat N29978. It has 6 ports supporting automatic connection speed negotiation. Four of them support the Power over Ethernet (PoE). The switch automatically detects PD devices compliant with IEEE 802.3af or IEEE 802.3at and supplies them. This makes it possible to extend the range of the network to locations with no access to power lines or outlets, and where access points, IP cameras, IP phones, etc. have to be located. The maximum total power of the devices supplied must not exceed 65 W.
Sample application of the PoE switch
ULTIPOWER 0064afat 6xFE(4xPoE), 802.3af/at 65W N29978.
How to solve the problem of voltage drop on a long power line? The PSCU04344SEP M1833 power supply is designed to power devices over long cable sections. In order to eliminate voltage drops on a device caused by current flowing through a conductor with significant resistance, the power supply delivers DC voltage increased to 30-35 V to the power line. The cameras are equipped with DCDC10H M1834 converters providing stable 12 VDC voltage with a maximum current of 0.8 A. The PSU features 4 independent, galvanically separated outputs protected by fuses.
Stabilized Power Supply PSCU04344SEP (34VDC/4x1A, for 4 cameras via long lines with DC/DC converters)DC/DC Converter DCDC10H (18-40V/12V,1A)DC/DC Converter DCDC10H (18-40V/12V,1A)DC/DC Converter DCDC10H (18-40V/12V,1A)DC/DC Converter DCDC10H (18-40V/12V,1A)
Application diagram of the PSCU04344SEP power supply
Maximum distances between the power supply and the DC/DC converter due to the type and cross-section area of the power supply line:
Cable typeCross section [mm2]AWGMaximum distance from
camera 12 VDC/0.8 A [m]
UTP cat. 5E single pair0.2024100
UTP cat. 5E two pairs0.4021200
UTP cat. 5E three pairs0.6019300
Stranded conductor0.2024100
Stranded conductor0.5020250
Stranded conductor0.7518400
Stranded conductor1.0017500
Stranded conductor1.5015750
Family of Signal TV brackets. The choice of a bracket for hanging a TV set on the wall comes down to three main features: load capacity, size and mounting standard. The most important criterion is the load capacity of the wall bracket, since it directly affects the safety of the receiver and the people staying near it.
Each of the brackets listed in the table below can be adjusted horizontally. However due to the construction and design solutions used this adjustment may not be permanent. The TV will tilt to the left or right when the setting is adjusted. This is the case with cheaper solutions intended for fixed TV positioning. For those who want to adjust the TV position, e.g. depending on whether it is watched from behind the table or from the sofa, we recommend the LPA16-444AX E93164 and LPA19-442 E93168 brackets. The rigid structure, bushings and adjustable smoothness of movement will satisfy the most demanding customers.
Example of mounting a 40" TV using the Signal LPA16-444AX 32"-55" bracket
Product PLB-CE946-02LLPA36-443ALPA16-444AXLPA19-442
TV size37'' - 70''32'' - 55''32'' - 55''32'' - 55''
Load capacity50 kg50 kg30 kg30 kg
VESA mountmax. 600 x 400max. 400 x 400max. 400 x 400max. 400 x 400
Zero channel in Hikvision DVRs. At times, it is necessary to get a real-time view of multiple DVR channels using a web browser or CMS client software. In Hikvision DVRs, there is an option of encoding the zero channel where, with a small stream, without degrading the quality of recorded video, you can get the image from all cameras in one window in a remote client or in a web browser. In the zero channel settings, it is possible to set such parameters as maximum bitrate (up to 2 Mbps) and maximum frame rate (up to 25 fps).
The parameters may vary slightly depending on the firmware version of the NVR. The live view can be configured in the local user interface and the channel can be activated locally or remotely, directly from the NVR.
  • locally: System -> Live View -> Channel zero -> Enable Channel-zero Encoding,
  • remotely: Configuration -> Video/Audio -> Channel-zero.
View of channel zero activation window in a web browser in the
DS-7608NXI-I2/S K22097 DVR with firmware version 4.40.415
Real-life example of a simple fiber optic distribution frame. The following pictures show an examplary implementation of a budget fiber optic distribution frame L51340 designed to be mounted in a rack. 8 out of 12 fibers of the universal cable L76012 are terminated in the distribution frame. The L3551 SC pigtail was used to terminate the fiber, which was then plugged into the L4211 adapter. The adapters were bolted to the faceplate using the screws provided with the switch.
Due to possible further expansion of the frame (4 fibers are not terminated), one of the front panels has been protected with SC Simplex blank plugs, and another, due to low probability of use, has been replaced with L51342 blank front panel guaranteeing protection against dirt, dust, etc.
ULTIMODE RPU-324 L51340 and L51320 optical fiber distribution frames are perfect for terminating optical cables with single-tube or tubeless construction
New products offered by DIPOL
Industrial switch: ULTIPOWER 350IND 5xGE
ULTIPOWER 350IND 5xGE switch N299734 is an industrial device enabling smooth data transmission. in 10/100/1000 Mbps Ethernet networks. It has 5 RJ45 ports supporting automatic connection speed negotiation. Switches of this type can be used in systems in industrial facilities with a risk of adverse conditions for the equipment operation, such as increased dust, high or low temperature or high humidity.

Pole mount for waterproof boxes SH-750
Pole mount for the SH-750 waterproof box R90610H, for mounting on a pole with steel tape (max. 25 mm). The set includes 3 fasteners and bolts with nuts and washers. The mount is made of aluminum and is resistant to corrosion.

4K IP NVR: Hikvision DS-7716NXI-I4/S (16 ch, 160 Mbps, 4xSATA, VGA, VGA, HDMI, BNC, H.264)
Hikvision DS-7716NXI-I4/S IP 4K NVR K22172 is a modern 16-channel IP recorder, recording image from IP cameras with a resolution of up to 12 MP. Independent HDMI 2 (resolution up to 4K) and VGA (resolution up to 1080p) allow you to connect two monitors. The view on each can be configured independently, different window divisions and are possible and the image from any camera can be displayed on each of them. 4 SATA ports enable connection of hard drives with a capacity of up to 10 TB each.
Worth reading
LTE signal repater. GDW-505 A6777 repeater/amplifier is used to amplify EGSM, GSM, DCS, WCDMA, and LTE signals and bring them indoors. The device is ideal for locations , where the range of a cellular network allows for use of mobile phones out of buildings, but is insufficient for indoor operation. An example may be a place located far from the transmitter or a building with thick walls, cellars (coffee shops) or modern windows with panes of covered with metallic compounds...>>>more
LTE repeater installation in a single-family house
Hik-ProConnect – cloud service for installers and integrators of Hikvision systems
Hik-Pro Connect - new platform for installers and integrators
Osoby mající zájem o zasílání týdenního Newsletter elektronickou poštou, prosímme, uveďte svůj e-mail: